ActionTec DSL Modem

By admin in : Routers // Feb 17 2010

The information below should assist you in setting up your ActionTec DSL modem to work with iCU2:

On iCU2:

1: Go into Tools – Options – Ports
2: Switch from Direct to Network
3: Make sure Normal Ports and Network Ports both say:
Primary Port: TCP 2000
Secondary Port: TCP 2001
4: At the end of the “Network / Firewall / Router..” text you will see “IP Address” — Take note of that IP address

On the ActionTec’s admin area (screenshots available here: http://www.coinfotech.com/support/actiontec_advanced_setup_static_ip.htm):

1: Go to the Advanced Area
2: Then enter the Port Forwarding Area
3: Enter this data:

4: Click on “Add”

At this point you may need to restart your iCU2/Computer for the changes to take affect.

Note: we cannot guarantee how accurate the information / screenshots are. You may need to contact ActionTec for info on how to Forward TCP 2000-2001 to your IP address.

Comments are closed.